• Beamicon2Basic and MDLCNC power amplifier from Letmathe (bundle)

Beamicon2Basic and MDLCNC power amplifier from Letmathe (bundle)

Special offer!

The MDLCNC-T4V6 stepper motor output stage is an inexpensive output stage for 4 axes with up to 4.5A/36V.
The output stage was not developed for the Beamicon2-Basic, but can be used with minor restrictions. There is also an FI module which allows the connection of a frequency converter (1 relay 230V and 1 0..10V output).

To obtain a functional drive system, the following components are required in addition to the MDLCNC output stage:
One to four two-phase stepper motors with a rated current between 0.5 and 4.5A. Three-phase or five-phase motors or high-impedance motors from printers and floppy disk drives
are not suitable. A power supply unit for the power supply with an output voltage between 18 and 36V. Stabilization is not absolutely necessary. More detailed selection criteria are listed in chapter 3.2.
A PC with Beamicon2Basic software installed (to select the PC and operating system, please refer to the Beamicon2 software user manual), and a Micropod2 with firmware for the MDLCNC power amplifier. This firmware is included with Beamicon2Basic and can be loaded later (see Installation software).

Instructions

Beamicon2Basic and MDLCNC power amplifier from Letmathe (bundle)

  • 149.00€
  • 94.14€